1) DSHS-1 Slurry Water Loss Tester is used to determine the water loss of drilling slurry if it goes through a certain size of filtration area within a certain time (30 minute) under stipulated working pressure (0.69 MPa).It has two types, with an inflator, or with a decompression device. 2) DSHS-1 Slurry Water Loss Tester with an inflator can...

1)DSHB-1 Slurry Gravimeter is designed and developed as per the Industry Standard of Petrochemical of People’s Republic of China SY/T 5381 “Technical Specification for Drilling Fluid Gravimeter”. The instrument is applied to determine gravity of slurry in the drilling field or in the laboratory. The unit is g/cm3. 2)DSHB-1 Slurry Gravimeter...

DSHA-1 Slurry Sand Content Tester is used to test the sand content of slurry at well site or in the laboratory.The instrument gets the result by the volume change after slurry going through the sieve. Represented with...

DSH 1006 Slurry Viscometer is applied to measure the viscosity of slurry. The viscosity of slurry is determined by measuring the elapsed time for flowing out 500 ml slurry from the1006 Viscometer and the unit is...

1)DSHD-0633 Liquid Petroleum Asphalt Flash Point Tester is designed and developed as per T0633 “Liquid Petroleum Asphalt Flash Point Test (Tag Open Cup Methods)” in the Industry Standard JTJ052 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering. 2)DSHD-0633 Liquid Petroleum Asphalt Flash Point Tester is...

A: Standards: GB/T4507, ASTM D36, IP58 B: Application: Determining softening point of bitumen and coal tar bitumen C: Technical Features : 1. Steel ball : 9.53mm, 3.5±0.05g 2. Bracket: 2 holes 3. Beaker: 80ml 4. Heater power: 1000W...

1) DSHD-2806J Fully-automatic Asphalt Softening Point Tester is designed and developed as per Chinese GB/T 4507 Standard Test Method for Softening Point of Bitumenand Chinese industrial standard T0606-2011 Test Method for Softening Point of Bitumen (ring and ball method) in JTG E20-2011 Standard Teste Methods of Bitumen and...

1) DSHD-2806I Fully-automatic Asphalt Softening Point Tester is designed and developed as per GB/T 4507 Standard Test Method for Softening Point of Bitumen and Chinese industrial standard T0606-2011 Test Method for Softening Point of Bitumen (ring and ball method) in JTG E20-2011 Standard Teste Methods of Bitumen and Bituminous Mixtures...

1) DSHD-2806H Automatic Asphalt Softening Point Tester is designed and developed as per the National Standard of People’s Republic of China GB/T4507 “Test Method for Softening Point of Asphalt”, and T0606 “Asphalt Softening Point Test (Ring and Ball Method)” in the Industry Standard of People’s Republic of China...

1) DSHD-2806G Automatic Asphalt Softening Point Tester is designed and developed as per the National Standard of People’s Republic of China GB/T4507 “Test Methods for Softening Point of Asphalt”, and T0606 “Asphalt Softening Point Test (Ring and Ball Methods)” in the Industry Standard of People’s Republic of...